Huawei SmartAX MA5603T Configuration Manual page 669

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
Issue 01 (2014-04-30)
Command has been executed successfully
huawei(config-mvlan1000)#igmp match mode disable
Command has been executed successfully
(Optional) Set the address range for the dynamic programs. If you need to limit the
address range of dynamic programs, perform this operation. For example, set the
address range of dynamic programs to 224.1.1.1-224.1.1.100.
huawei(config-mvlan1000)#igmp match group ip 224.1.1.1 to-ip 224.1.1.100
8. Set the IGMP mode.
Select the IGMP proxy mode.
huawei(config-mvlan1000)#igmp mode proxy
Are you sure to change IGMP mode? (y/n)[n]:y
Command is being executed. Please wait...
Command has been executed successfully
9. Configure the IGMP upstream port.
Set the IGMP upstream port ID to 0/19/0 and working mode to default. Protocol
packets are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
10. (Optional) Set multicast global parameters.
In this example, the default settings are used for all the multicast global parameters.
11. Configure multicast users.
Add service ports 1 and 2 as multicast users.
huawei(config-btv)#igmp user add service-port 1
huawei(config-btv)#igmp user add service-port 2
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 1
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 2
huawei(config-mvlan1000)#quit
12. Save the data.
huawei(config)#save
Configure the HGW.
1. Log in to the Web configuration window.
a. Enter http://192.168.1.1/cu.html (default IP address) to the address bar of the
Internet Explorer (IE) and press Enter.
b. In the login dialog box, enter the user name and password of the administrator
(the Internet service provider (ISP) provides the default user name and default
password). Then, click OK.
2. Set parameters for the BTV service.
This example assumes LAN3 as an BTV port.
a. Choose Network > Bandwidth Configuration from the navigation tree.
b. In the right pane, create LAN connection 3 for the BTV service. Set the
parameters as follows:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
644