Huawei SmartAX MA5603T Configuration Manual page 330

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
configuration
on the MGC.)
Procedure
Step 1 Add the upstream VLAN interface.
According to the data plan, configure standard VLAN 20 as the media and signaling upstream
VLAN, add upstream port 0/19/0 to the VLAN, and configure the IP address of the Layer 3
Issue 01 (2014-04-30)
User data Phone number
TID
User priority
User type
System parameters
Overseas parameters
PSTN port attributes
Ringing current attributes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
The emergency standalone is not
supported, and therefore the
configuration of phone numbers is not
required when the users are added.
The MGC assigns phone numbers
83110000-83110031 to phones 0-31
respectively.
The terminal layering is supported, and
therefore the manual allocation of TIDs
is not required.
The users are common users, and the
user priority uses the default cat3.
The users are common users, and the
users are of the default DEL type.
According to the Background
Information in (Optional) Configuring
the System Parameters and confirmed
with the service provider, the default
settings can meet the service
requirements. Therefore, the system
parameters are not configured here.
According to the Background
Information in (Optional) Configuring
the Overseas Parameters and confirmed
with the service provider, the default
settings can meet the service
requirements. Therefore, the overseas
parameters are not configured here.
The polarity reversal accounting is
adopted, and therefore the PSTN port to
which the users belong needs to support
the polarity reversal pulse. The other
attributes of the PSTN port do not need
to be modified.
There is no special requirement, and the
configuration of the ringing current
attributes is not required.
305