Fttb Networking (Lan Access Without Hgw); Service Requirements And Application Scenarios - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Context
There are two xPON configuration modes: distributed mode (also called discrete mode) and
profile mode. The difference between the two modes lies in command lines.
l
l
Generally, the xPON configuration mode is determined in a new deployment and will not be
changed.
NOTE
For commands for the distributed configuration mode, see PON distributed-mode commands in the Command
Reference.
The description of this topic is based on the mode below. You can query the current mode in the
diagnosis mode.
Mode
GPON profile mode (system
default)
ADSL2+ common mode
(RFC2662 mode)
VDSL2 common mode (TR129
mode)

11.3.1 FTTB Networking (LAN Access Without HGW)

In FTTB networking (LAN access without the HGW), the ONU provides 100M FE access and
POTS access for Internet access service and VoIP service respectively for users. This topic
describes how to configure the Internet access service and VoIP service on the OLT and ONU
in FTTB networking.

11.3.1.1 Service Requirements and Application Scenarios

FTTB networking is usually used in trade estate and housing estate having high-density buildings
and users. In FTTB networking, optical fibers are connected from the central office (CO) to
buildings. The network section from the service convergence nodes to users is deployed by xDSL
or LAN access. LAN access is easily and commonly deployed and therefore becomes the first
choice for bandwidth construction.
Service Requirements
Only Internet access service and VoIP service are supported and there is no multicast
requirement.
Issue 01 (2014-04-30)
Distributed mode: In this mode, ONTs need to be configured one by one but not in batches.
Profile mode: In this mode, an ONT line profile and service profile are configured first.
Then, ONTs can be added in batches by binding profiles. This mode greatly improves
service provisioning efficiency.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Query Method
huawei(config)#diagnose
huawei(diagnose)%%display xpon mode
-------------------------------------------
Current config mode: Profile-mode
-------------------------------------------
huawei(config)#diagnose
huawei(diagnose)%%display xdsl mode
-------------------------------------------
ADSL Current mode : rfc2662
VDSL Current mode : tr129
--------------------------------------------
857

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents