Huawei SmartAX MA5603T Configuration Manual page 701

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
NOTE
If the upper-layer network requires isolation of media streams from signaling streams, create
different traffic streams for the media streams and signaling streams on the OLT. When the
packet is forwarded from two WAN ports, the configured VLAN is carried by default. Create
a WAN port named WAN-RTP on the ONT, and set this WAN port to a media WAN port.
Specifically, choose Interface 1 > RTP and set Associate WAN Interface to WAN2.
f. Configure the MGC parameters.
In the navigation tree, choose General Para > Services > Voice Service > Voice
Service 1 > Interface configuration > Interface 1 > H248. Select H248 and
enter (or select) a proper value.
– Primary MGC: 200.200.200.200
– MID Format: MG Domain name
NOTE
l If dual-homing is configured, Secondary MGC must be set.
l MID Format can be set to MG Domain Name, IP, or Device name.
g. Configure the voice users.
a. In the navigation tree, choose General Para > Services > Voice Service >
Voice Service 1 > Interface configuration > Interface 1 > User. Right-
click User and choose Add from the shortcut menu.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
676