Cisco SR2016T-NA Reference Manual page 498

Supported Platforms and Cisco IOS Releases
Table 3-1 Cisco Cable CMTS IOS Releases
Cisco IOS Release
Cisco IOS Release 12.3(9a)BC
Cisco IOS Release 12.2(15)BC1 Cisco uBR7100 series routers,
Cisco IOS Release 12.2(11)CY
Cisco IOS Release 12.2(15)CX
Cisco IOS 12.1(19)EC
Cisco IOS Release 12.0(16)SC3 Cisco uBR7200 series routers
This section documents only cable-specific show commands. For non-cable-specific commands, see the
Tip
command reference documentation for
Cisco Broadband Cable Command Reference Guide
3-2
Platforms Supported
Cisco uBR7100 series routers,
Cisco uBR7200 series routers,
Cisco uBR10012 router
Cisco uBR7200 series routers,
Cisco uBR10012 router
Cisco uBR10012 router
Cisco uBR7246VXR router
Cisco uBR7100 series routers,
Cisco uBR7200 series routers
Description
Introduced enhancements for the following commands:
show cable tech-support
•
show controllers cable
•
show crypto ca certificates
•
show crypto ca trustpoints
•
• show tech-support
The 12.2 BC train is the Cisco cable-specific early
deployment release train that provides DOCSIS 1.1 and
other new feature support.
Release 12.2(11)CY introduces support for the
Cisco uBR-MC5X20S cable interface line card.
Release 12.2(15)CXintroduces support for the
Cisco uBR-MC28U/X cable interface line card.
The 12.1 EC train is the Cisco cable-specific early
deployment "stable" DOCSIS 1.0 release train.
The 12.0 SC train was the previous Cisco cable-specific
"stable" release train for Cisco uBR7200 series routers.
This train excludes telco return, DOCSIS 1.0 extensions
support, Cisco UBR7246 VXR clock card feature set,
and the Cisco uBR-MC16S-based hardware and
software support.
Note The 12.0 SC has reached its end of life with the
12.0(16)SC3 release.
Cisco IOS Release 12.2, available on Cisco.com.
Chapter 3 Cisco CMTS Show Commands
OL-1581-08