Table of Contents
Advertisement
redundancy
redundancy
To enter redundancy configuration mode, use the redundancy command in global configuration mode.
Syntax Description
This command has no keywords or arguments.
Defaults
No default behavior or values
Command Modes
Global configuration
Command History
Release
12.2(4)XF
Usage Guidelines
When you enter redundancy configuration mode, the prompt changes to the following:
Router(config-r)#
After you enter redundancy configuration mode, you can use the main-cpu command to enter main-CPU
redundancy configuration mode, which allows you to specify which files are synchronized between the
active and standby Performance Routing Engine (PRE1) modules.
To leave redundancy configuration mode and to return to global configuration mode, use the exit
command.
Examples
The following example shows how to enter redundancy configuration mode and the commands that are
available in that mode:
Router# config t
Router(config)# redundancy
Router(config-r)# ?
Redundancy configuration commands:
associate
exit
main-cpu
no
Router(config-r)#
Related Commands
Command
associate
Cisco Broadband Cable Command Reference Guide
4-36
redundancy
Modification
This command was introduced for the Cisco uBR10012 router.
Associate redundant slots
Exit from redundancy configuration mode
Enter main-cpu mode
Negate a command or set its defaults
Description
Associates two line cards for Automatic Protection Switching (APS)
redundancy protection.
Chapter 4
Commands for the Cisco uBR10012 Router
OL-1581-08
Advertisement
Table of Contents
