Table of Contents
Advertisement
snmp-server enable traps cable
Release
12.2(4)BC1
12.2(8)BC1
12.2(11)BC1
12.2(15)BC1
12.2(15)BC21
Usage Guidelines
For other SNMP commands that affect the operation of the CMTS, see the Cisco IOS Configuration
Fundamentals Command Reference Guide.
Examples
The following example shows how to enable all traps for cable-related events except HCCP switchovers
on the CMTS:
Router# configure terminal
Router(config)# snmp-server enable traps cable cm-chover cm-onoff cm-remote-query hopping
Router(config)#
The following example shows how to enable traps for any HCCP switchovers that occur on the CMTS:
Router# configure terminal
Router(config)# snmp-server enable traps cable hccp-failover
Router(config)#
The following example shows how to enable traps for when a user violates the maximum bandwidth for
the quality of service (QoS) profile specified by their enforce-rule.
Router# configure terminal
Router(config)# snmp-server enable traps cable enforce-rule
Router(config)#
Related Commands
Command
cable modem remote-query
debug cable remote-query
show cable modem remote-
query
Cisco Broadband Cable Command Reference Guide
2-478
Modification
This command was supported on the Cisco uBR10012 universal broadband
router. The cmts-event option was also removed as redundant.
The hccp-failover option was supported on the Cisco uBR10012 router.
The hccp-failover option was supported on the Cisco uBR7200 series
router.
The enforce-rule option was added to generate traps for subscribers who
violate their enforce-rule QoS profile.
The dmic-lock and usage options were added.
Description
Enables and configures the remote-query feature to gather CM
performance statistics on the CMTS.
Turns on debugging to gather information from remote CMs.
Displays the statistics accumulated by the remote-query feature.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
