Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
debug cable range
Freq Error = 423, Freq offset is 1692
Ranging Modem with Sid 2 on i/f : Cable3/0/U0
The following is typical output when the modem is reassigned the same SID during initial maintenance.
Ranging Modem with Sid 2 on i/f : Cable3/0/U0
Got a ranging request
SID value is 2 on Interface Cable3/0/U0
CM mac address 00:10:7B:43:AA:21
Timing offset is 0
Power value is 1823, or -1 dB
Freq Error = 13, Freq offset is 0
Ranging has been successful for SID 2 on Interface Cable3/0/U0
Output occurs when the modem is polled by the CMTS during station maintenance. Polling happens at
a minimum rate of once every 10 seconds.
Cisco Broadband Cable Command Reference Guide
5-62
OL-1581-08
Advertisement
Table of Contents
