Cisco SR2016T-NA Reference Manual page 937

Chapter 5 Cisco CMTS Debugging Commands
debug cable telco-return msg
To display the Telephony Channel Descriptor (TCD) and Termination System Information (TSI)
messages that are sent downstream to the telco-return CMs, use the debug cable telco-return msg
command in privileged EXEC mode. To disable debugging output, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History Release
12.0(4)XI
Usage Guidelines
This command is supported only in images that support telco-return operation (-t-).
Examples
The following is sample output from the debug cable telco-return msg command:
Router# debug cable telco-return
Router# debug cable telco-return msg
01:17:31:Sending TCD message:
TLV type = 1
TLV len = 56
Factory default flag: 1
Phone number 1:
Service provider name:uBR7246
Connection threshold: 10
Username:
Password:
DHCP authenticate:
DHCP server:
PPP authentication:
Manual dial:
Sending TSI message:
DS channel IP address:
Registration IP address:10.10.10.10
CMTS boot time:
DS channel ID:
Epoch:
Related Commands Command
debug cable telco-return
OL-1581-08
debug cable telco-return msg
no debug cable telco-return msg
5551212
guest
password
1
10.10.255.255
2
1
Modification
This command was introduced.
10.10.10.10
3080626752
0
1
Description
Displays debug messages for telco-return events.
Cisco Broadband Cable Command Reference Guide
debug cable telco-return msg
5-77