Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows how to preserve both the CLI and SNMP service flow counters when a
DOCSIS 1.1-provisioned CM goes offline:
Router(config)# cable primary-sflow-qos11 keep all
Router(config)#
The following example shows how to preserve only the SNMP-based service flow counters when a
DOCSIS 1.1-provisioned CM goes offline. The CLI-based counters are still reset to zero when this CM
goes offline.
Router(config)# cable primary-sflow-qos11 keep snmp-only
Router(config)#
The following example shows how to disable this command and return to the default behavior, which is
to reset all CLI-based and SNMP-based counters when a DOCSIS 1.1-provisioned CM goes offline.
Router(config)# no cable primary-sflow-qos11 keep
Router(config)#
Related Commands
Command
cable sflog
show cable modem
counters
OL-1581-08
Description
Enables service flow logging and configures the number and duration of
entries in the log.
Displays downstream and upstream traffic counters for one or more CMs.
Cisco Broadband Cable Command Reference Guide
cable primary-sflow-qos11 keep
2-181