Table of Contents
Advertisement
clear redundancy
clear redundancy
To clear the counters and history information that are used by the Redundancy Facility (RF) subsystem,
use the clear redundancy command in privileged EXEC mode.
Syntax Description
counters
history
Defaults
No default behavior or values
Command Modes
Privileged EXEC
Command History
Release
12.2(4)XF1
Usage Guidelines
The clear redundancy command clears the following information, which is shown by the
redundancy
•
•
Examples
The following example shows how to clear the RF counters that are displayed by the
command:
Router# clear redundancy counters
Router#
The following example shows how to clear the RF history information that is displayed by the
redundancy
Router# clear redundancy history
Router#
Related Commands
Command
show redundancy
Cisco Broadband Cable Command Reference Guide
4-14
clear redundancy {counters | history}
Clears the RF counters that are maintained by the RF subsystem.
Clears the history of RF activity that is maintained by the RF subsystem.
Modification
This command was introduced for the Cisco uBR10012 router.
command:
counters—Maintain the number of messages sent and received, buffers used, and synchronization
errors.
history—Shows the RF subsystem activity, such as checkpoint messages sent between RF clients.
command:
Description
Displays the current redundancy state.
Chapter 4
Commands for the Cisco uBR10012 Router
show redundancy
show
show
OL-1581-08
Advertisement
Table of Contents
