Cisco SR2016T-NA Reference Manual page 476

penalty-period
Examples The following example shows an enforce-rule being configured for a penalty period of 1440 minutes
(1 day):
Router# configure terminal
Router(config)# cable qos enforce-rule test
Router(enforce-rule)# penalty 1440
Router(enforce-rule)# exit
Router(config)#
Related Commands Command
activate-rule at-byte-
count
cable qos enforce-rule
enabled
enforced qos-profile
monitoring-duration
registered qos-profile
show cable qos
enforce-rule
show cable
subscriber-usage
Cisco Broadband Cable Command Reference Guide
2-464
Description
Specifies the number of bytes that a subscriber can transmit during the
monitoring period.
Creates an enforce-rule to be used to enforce a particular quality of service
(QoS) profile and enters enforce-rule configuration mode.
Activates an enforce-rule and begins subscriber traffic management.
Specifies the quality of service (QoS) profile that should be enforced when
users violate their assigned QoS profiles.
Specifies the time period and sample rate to be used for monitoring
subscribers.
Specifies the registered Quality of Service (QoS) profile that should be used
for this enforce-rule.
Displays the quality of service (QoS) enforce-rules that are currently
defined.
Displays subscribers that are violating their registered quality of service
(QoS) profiles.
Chapter 2 Cisco CMTS Configuration Commands
OL-1581-08