Table of Contents
Advertisement
show cable modem qos
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable qos permission
cable qos profile
cable service-flow
inactivity-timeout
show cable modem
show cable modem
access-group
show cable modem
classifiers
show cable modem
connectivity
show cable modem
registered
show cable modem
remote-query
show cable modem
unregistered
show cable
modulation-profile
show interface cable
modem
show interface cable
qos paramset
show interface cable
sid
show cable qos profile
Cisco Broadband Cable Command Reference Guide
3-108
Description
Specifies permission for updating the cable router QoS table.
Configures a QoS profiles.
Sets the amount of time a dynamic service-flow can be present in the system
without any activity.
Displays information for the registered and unregistered CMs.
Displays the access groups for the CMs on a particular cable interface.
Displays information about the classifiers for a particular CM.
Displays connectivity statistics for one or more CMs.
Displays a list of the CMs that are marked as registered with the
Cisco CMTS.
Displays information collected by the remote-query feature.
Displays a list of the CMs that are marked as unregistered with the
Cisco CMTS.
Displays modulation profile group information.
Displays information about the CMs connected to a particular cable
interface.
Displays the DOCSIS 1.1 QoS parameter sets.
Displays cable interface information.
Displays quality-of-service (QoS) profiles for a Cisco CMTS.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
