Chapter 1 Supported Platforms And Cisco Ios Releases - Cisco SR2016T-NA Reference Manual

Supported Platforms and Cisco IOS Releases
This chapter identifies the supported platforms and Cisco IOS Releases for the CMTS and cable CPE
technologies. The Cable CMTS commands operate on the Cisco uBR7100 series routers,
Cisco uBR7200 series routers, and Cisco uBR10012 Cable Modem Termination Systems (CMTS)
universal broadband routers. As of the date of this manual's publication, this guide lists the commands
that are found in the Cisco IOS releases shown in
Table 1-1 Cisco Cable CMTS IOS Releases
Cisco IOS Release
Cisco IOS Release 12.3(9a)BC
Cisco IOS Release 12.2(15)BC2 Cisco uBR7100 series routers,
Cisco IOS Release 12.2(15)CX
OL-1581-08
Platforms Supported
Cisco uBR7100 series routers,
Cisco uBR7200 series routers,
Cisco uBR10012 router
Cisco uBR7200 series routers,
Cisco uBR10012 router
Cisco uBR7246VXR router
C H A P T E R
Table 1-1:
Description
Cisco IOS Release 12.3(9a)BC supports the following
new or enhanced command-line interface:
cable arp filter
•
• cable logging layer2events
cable source-verify
•
• cable submgmt default
show cable tech-support
•
show controllers cable
•
show crypto ca certificates
•
show crypto ca trustpoints
•
show tech-support
•
The 12.2 BC train is the Cisco cable-specific early
deployment release train that provides DOCSIS 1.1 and
other new feature support.
Release 12.2(15)CX introduces support for the
Cisco uBR-MC28U/X cable interface line card and
DOCSIS 2.0 A-TDMA operations. It has been
superseded by Release 12.2(15)BC2.
Cisco Broadband Cable Command Reference Guide
1
1-1