Table of Contents
Advertisement
show interface cable sid
Table 3-59 show interface cable sid Field Descriptions (continued)
Field
Fragment reassembly
incomplete
Concatenated packets received
Good Codewords rx
Corrected Codewords rx
Uncorrectable Codewords rx
Concatenated packets received
Fragmentation headers received
Fragmentation headers discarded Number of upstream fragments discarded and not assembled into a
Tip
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
clear cable secondary-
ip
show cable modem
connectivity
show interface cable
signal-quality
Cisco Broadband Cable Command Reference Guide
3-240
Description
Number of packets that were subject to DOCSIS fragmentation that
have not yet been successfully reassembled.
This counter is not supported on the Cisco uBR-MC5X20
Note
card and always shows 0 or N/A, depending on the software
release.
Number of packets that were subject to DOCSIS concatenation that
were successfully received.
This counter is not supported on the Cisco uBR-MC5X20
Note
card and always shows 0 or N/A, depending on the software
release.
Number of FEC codewords received without error.
Number of FEC codewords received with errors that could be
corrected.
Number of FEC codewords received with errors that could not be
corrected.
Number of concatenation headers received on an upstream service
flow. (This field always shows 0 for the Cisco uBR10012 router,
but you can use the docsQosUpstreamConcatBursts attribute in
DOCS-QOS-MIB to get a current count.)
Number of fragmentation headers received on an upstream service
flow, regardless of whether the fragment was correctly
reassembled into a valid packet. (See docsQosUpstreamFragments
in DOCS-QOS-MIB.)
valid upstream packet. (See docsQosUpstreamFragDiscards in
DOCS-QOS-MIB.)
Description
Clears the router's table that links secondary IP addresses to the devices that
use them.
Displays connectivity statistics for one or more CMs.
Displays information about the cable signal quality.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
