Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
Release
12.1(4)CX, 12.2(1)XF,
and 12.2(4)BC1
12.1(11b)EC,
12.2(8)BC1
12.2(8)BC2
12.1(13)EC
12.2(11)BC1
12.2(11)CY,
12.2(11)BC3
12.2(11)BC3
Usage Guidelines
Data transport over the radio frequency (RF) link uses the registered SID address rather than the Ethernet
address. This allows multiple hosts to access the network via a single CM.
The verbose keyword can be used with any of the other options or by itself, but it displays additional
information only when used with the counters and qos options.
You can specify only a main interface with this command, not a subinterface.
Note
Examples
The following sample output from the show interface cable sid command shows the various forms of
the command.
Router# show interface c4/0 sid
Sid
5
6
7
8
9
Router# show interface c4/0 sid qos
Sid
OL-1581-08
Modification
The qos keyword was added to display information on the QoS values
received by the SID from the MAC scheduler. You an also use the verbose
option with the qos keyword to display detailed information.
Also, the connectivity option was removed and replaced by the
modem connectivity
The association keyword was added.
An explicit error message was added if this command is used with a cable
subinterface, instructing the user to use the main interface instead.
The secondary-ip keyword was added for the Cisco uBR7100 series and
Cisco uBR7200 series universal broadband routers.
Support for the secondary-ip keyword was added for the Cisco uBR10012
universal broadband router.
Three codeword fields were added to the verbose counters display to
support the Cisco uBR-MC5X20S cable interface line card. These fields
always display zero for the other cable interface line cards.
The counters option now displays the following counters:
Concatenated headers received
•
Fragmentation headers received
•
Fragmentation headers discarded
•
Note
Prim
MAC Address
IP Address
0010.7b6b.58c1 10.20.114.34
0010.7bed.9dc9 10.20.114.37
0010.7bed.9dbb 10.20.114.38
0010.7b6b.58bb 10.20.114.112
0010.7b6b.58bb 10.20.114.112
Pr MaxSusRate MinRsvRate Sched
command.
The Cisco uBR-MC5X20S cable interface line card does not
currently support these particular counters.
Type Age
stat 2d1h36m
stat 2d1h36m
stat 2d1h36m
stat 2d1h34m
dyna 2d1h34m
Grant Grant
GPI Poll
Cisco Broadband Cable Command Reference Guide
show interface cable sid
show cable
Admin
Sched
Sfid
State
Type
enable
BE
1
enable
BE
13
enable
BE
15
enable
BE
17
enable
BE
19
Thrput
3-235
Advertisement
Table of Contents
