Table of Contents
Advertisement
show pxf cpu
statistics
[diversion | drop
[interface] | ip | mlp]
subblocks [interface]
Defaults
No default behavior or values
Command Modes
User EXEC, Privileged EXEC
Command History
Release
12.2(1)XF1
12.2(11)BC2
12.2(15)BC2
Examples
See the following sections for typical displays for the different forms of the show pxf cpu command.
Access-Lists
The following example shows a typical display for the access-list qos option, which displays
information about the processing of quality-of-service (QoS) access-lists:
Router# show pxf cpu access qos
PXF QoS ACL statistics:
ACL
101
First level lookup tables:
Block
0
1
2
Cisco Broadband Cable Command Reference Guide
4-62
Displays statistics for the packets that the PXF has processed. The default
is to display all packet statistics, or you can optionally specify one of the
following keywords to display a particular type of statistics:
diversion—(Optional) Displays packets that the PXF diverted to the
•
main route processor for special handling.
drop [interface]—(Optional) Displays dropped packets and bytes. You
•
can also optionally display the dropped packets for a particular
interface.
ip—(Optional) Displays statistics for the processing of IP and ICMP
•
packets.
mlp—(Optional) Displays statistics for multilink point-to-point
•
protocol (MLPPP) packets.
Displays subblocks information for all interfaces, or optionally for one
interface.
Modification
This command was introduced as show hardware pxf cpu for the
Cisco uBR10012 router.
The MAC domain was added to the display of the show pxf cpu subblocks
command for a particular cable interface.
This command was renamed from show hardware pxf cpu to show pxf
cpu. In addition, the cef option was enhanced to display CEF tag adjacency
information. The verbose option was also added to the cef option to display
more detailed information about the Forwarding Information Base (FIB)
tables being maintained by the CEF subsystem.
State
Tables
Operational
1
Use
Rows
TOS/Protocol
IP Source (MS)
IP Source (LS)
Chapter 4
Entries
Config
Fragment
9
1
Columns
Memory used
1/128
0/32
16384
1/128
0/32
16384
1/128
0/32
16384
Commands for the Cisco uBR10012 Router
Redundant
Memory
0
0
1Kb
OL-1581-08
Advertisement
Table of Contents
