Cisco SR2016T-NA Reference Manual page 177

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

Chapter 2
Cisco CMTS Configuration Commands
cable modem vendor
To associate the name of a vendor with its Organizational Unique Identifier (OUI), use the cable modem
vendor command in global configuration mode. To remove the association of the vendor name with its
OUI, use the no form of this command.
Syntax Description
OUI
vendor-name
Defaults
A default database contains approximately 300 OUIs associated with approximately 60 vendor names.
Command Modes
Global configuration
Command History
Release
12.2(8)BC2
Usage Guidelines
The cable modem vendor command allows you to associate an arbitrary string with an OUI to identify
the vendor of the associated CM. The vendor name is then displayed as part of the
vendor
The
OUI and vendor are not in that database, the
the vendor name, but you can use the cable modem vendor command to associate a vendor name with
the new OUI.
If you specify an OUI with the cable modem vendor command that already exists in the OUI database,
the previous value is overwritten with the new value. You can use the default prefix to restore the
original value for an OUI in the default database.
You can also use the no cable modem vendor command to remove the association between an OUI and
a vendor name. The
name.
OL-1581-08
cable modem vendor OUI [vendor-name]
no cable modem vendor OUI [vendor-name]
command.
show cable modem vendor
show cable modem vendor
Specifies the Organizational Unique Identifier (OUI). An OUI is the
first 3 octets (3 bytes, 6 hexadecimal digits) of the CM MAC address and
typically indicates the vendor for the CM. The octets can be specified as
one string (for example: 000102), or each octet can be separated by a
hyphen, period, or colon (for example: 00-01-02 or 00:01:02 or
00.01.02).
You can use either a period or colon as the separator between
Note
octets when manually entering this command, but the
command that is written to the running and startup
configuration files will always use a period.
(Optional) Specifies an arbitrary string identifying the vendor for this
OUI.
Modification
This command was introduced.
command uses a default database of approximately 300 OUIs. If the
show cable modem vendor
command then displays only the OUI as the vendor
Cisco Broadband Cable Command Reference Guide
cable modem vendor
show cable modem
command displays the OUI as
2-165

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents