Table of Contents
Advertisement
show cable modem summary
Release
12.2(8)BC1
12.2(15)BC2
Usage Guidelines
This command displays a summary of CMs for a single cable interface or upstream, or for a range of
cable interfaces or upstreams. The following possible combinations are possible for this command:
•
•
•
•
•
Also see the information about this command's behavior in a Hot Standby Connection-to-Connection
Note
Protocol (HCCP) configuration, see the
Protocol (HCCP) Configuration" section on page
Examples
The following example shows typical output for the default form of the show cable modem summary
command on a Cisco uBR7200 series router:
Router# show cable modem summary
Interface
Cable3/0/U0
Cable3/0/U1
Cable3/0/U2
Cable3/0/U3
Cable5/0/U0
Cable6/0/U0
Router#
The Description field appears in Cisco IOS Release 12.1(11b)EC, 12.2(15)BC2, and later releases, and
Note
shows the string configured for the upstream using the
The following example shows typical output for the show cable modem summary command with the
total option on a Cisco uBR7200 series router:
Router# show cable modem summary total
Interface
Cable5/0/U0
Cable6/0/U1
Cisco Broadband Cable Command Reference Guide
3-120
Modification
The total option was supported for the Cisco uBR10012 universal
broadband router.
The upstream Description field was added to the show cable modem
summary display in Cisco IOS Release 12.2 BC.
show cable modem summary total—Displays a summary and a total for all CMs on the chassis.
show cable modem summary cable x/0 total—Displays a summary of CMs on a specified card.
show cable modem summary cable x/0 upstream port1 port2 total—Displays a summary of CMs
on the specified card and specified range of ports. The port1 value must be less than the port2 value.
show cable modem summary cable x/0 cable y/0 total—Displays a summary of CMs on the
specified range of cards.
show cable modem summary cable x/0 cable y/0 upstream port1 port2 total—Displays a
summary of CMs on the specified range of ports on the specified range of cards.
Total
Active
Modems
Modems
165
141
209
172
262
207
256
194
746
714
806
764
Total
Active
Modems
Modems
746
806
"Operation with Hot Standby Connection-to-Connection
3-54.
Registered
Modems
141
170
203
188
711
759
cable upstream description
Registered
Modems
714
711
764
759
Chapter 3
Cisco CMTS Show Commands
Description
Line 32/1
Line 32/2
Line 32/3
Line 32/4
Line 41/1
Line 42/2
Description
Node1
Node3
command.
OL-1581-08
Advertisement
Table of Contents
