Table of Contents
Advertisement
show cable burst-profile
Table 3-5
Table 3-5
Field
Burst profile number
Type
Preamb length
Diff encode
FEC err correct
FEC codeword length
Scrambl seed
Max size
Guard size
Last codeword shortened
Scrambl
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable upstream modulation-
profile
show cable hop
show cable modulation-
profile
show interface cable sid
Cisco Broadband Cable Command Reference Guide
3-14
describes the fields shown in the show cable burst-profile command display.
show cable burst-profile Field Descriptions
Description
The number of the burst profile.
Type of burst profile.
Length of the preamble.
Shows if there is a diff encode.
Shows the forward error correction.
Shows the length of the forward error correction codeword.
Shows the seed of the scrambler.
Designates the maximum burst size.
Indicates the guard time size.
Shows the last codeword shortened.
Indicates whether scramble is enabled (yes) or not (no).
Description
Configures a spectrum group to use a specified frequency.
Displays CM configuration settings.
Displays the currently defined modulation profiles.
Displays cable interface information.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
