Cisco SR2016T-NA Reference Manual page 373

Chapter 2 Cisco CMTS Configuration Commands
Release
12.2(15)CX1
12.2(15)BC2
Usage Guidelines This command preprovisions a slot in the Cisco uBR10012 router to accept a particular line card, so that
you can configure the interface without the card being physically present in the chassis. This command
allows system administrators to plan for future configurations, without having to wait for the physical
hardware to first arrive. When the line card does arrive, the installer can bring the card online by inserting
the card into the chassis and connecting the necessary cables, without having to do any further
configuration using the command-line interface.
The type of card must be appropriate for the slot being specified. Slots 1/1 and 2/1 are reserved for TCC+
utility cards. Slots 1/0 through 4/0 are reserved for network uplink line cards. Slot 5/0 through 8/1 are
reserved for cable interface line cards. Slot 0/0 is reserved for the FastEthernet interface on the PRE1
module and cannot be specified in this command.
Table 2-14
Table 2-14 Card Types Supported by the card Command
Card Type
1cable-mc16c
1cable-mc16e
1cable-mc16s
1gigethernet-1
1oc12pos-1
1oc48dpt-pos-1
2cable-mc28bnc
2cable-mc28c
2cable-tccplus
2oc12srp-sm-lr
5cable-mc520s-d
5cable-mc520u-d
OL-1581-08
Modification
Support was added for the Cisco uBR-MC16U/X and Cisco uBR-MC28U/X
cable interface line cards.
Support was added for the Cisco uBR-MC16U/X, Cisco uBR-MC28U/X,
and Cisco uBR-MC5X20U cable interface line cards.
lists the types of cards that are supported as card-types for the card command:
Description
Preprovisions a slot for a Cisco uBR-LCP-MC16C or Cisco uBR-LCP2-MC16C
cable interface line card.
Preprovisions a slot for a Cisco uBR-LCP-MC16E or Cisco uBR-LCP2-MC16E
cable interface line card.
Preprovisions a slot for a Cisco uBR-LCP-MC16S or Cisco uBR-LCP2-MC16S
cable interface line card.
Preprovisions a slot for a Cisco uBR10-1GE Gigabit Ethernet (GigE) uplink line
card.
Preprovisions a slot for a Cisco uBR10-1OC12/P-SMI OC-12 POS uplink line
card.
Preprovisions a slot for a Cisco uBR10012 OC-48 DPT/POS Interface Module
uplink line card.
Preprovisions a slot for a Cisco uBR-LCP-MC28C-BNC or Cisco uBR-LCP2-
MC28C-BNC cable interface line card.
Preprovisions a slot for a Cisco uBR-LCP-MC28C or Cisco uBR-LCP2-MC28C
cable interface line card.
Preprovisions a slot for a Timing, Control, and Communications Plus (TCC+)
utility card.
This option is informational only, because slots 1/1 and 2/1 can be used
Note
only for the TCC+ card.
Preprovisions a slot for a Cisco uBR10-SRP-OC12SML DPT WAN uplink line
card.
Preprovisions a slot for a Cisco uBR10-MC5X20S-D cable interface line card.
Preprovisions a slot for a Cisco uBR10-MC5X20U-D cable interface line card.
Cisco Broadband Cable Command Reference Guide
card
2-361