Cisco SR2016T-NA Reference Manual page 148

cable load-balance group interval
Examples The following example shows how to configure load-balance group 3 so that it performs a policy update
every 30 seconds:
Router# config terminal
Router(config)# cable load-balance group 3 interval 30
Router(config)#
The following example shows how to reset load-balance group 10 to its default update frequency of 10
seconds:
Router# config terminal
Router(config)# no cable load-balance group 10 interval
Router(config)#
Related Commands Command
cable load-balance
exclude
cable load-balance
group (global
configuration)
cable load-balance
group (interface
configuration)
cable load-balance
group policy ugs
cable load-balance
group threshold
cable upstream load-
balance group
clear cable load-
balance
show cable load-
balance
Cisco Broadband Cable Command Reference Guide
2-136
Description
Excludes a particular cable modem, or all cable modems from a particular
vendor, from one or more types of load-balancing operations.
Creates and configures a load-balance group.
Assigns a downstream to a load-balance group.
Configures how the Cisco CMTS should load balance cable modems with
active unsolicited grant service (UGS) service flows.
Configures the threshold values that a load-balance group should use for
load-balancing operations.
Assigns an upstream to a load-balance group.
Clears the counters or state machine used to track load-balancing
operations.
Displays real-time statistical and operational information for load-
balancing operations.
Chapter 2 Cisco CMTS Configuration Commands
OL-1581-08