Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show cable service-class
To display the parameters for cable service class, use the show cable service class command in
privileged EXEC mode.
Syntax Description
sclass-index
verbose
Command Modes
Privileged EXEC
Command History
Release
12.1(4)CX
12.2(4)BC1
Usage Guidelines
You can display a summary of either one service class or all service classes. You can also display a
complete listing of each service class and of all the defined service classes.
Examples
The following sample output shows the standard and verbose formats of the show cable service class
command:
Router# show cable service-class
Index Name
1
2
3
4
5
Router# show cable service-class 1
Index Name
1
Router# show cable service-class 1 verbose
Index:
Name:
Direction:
Traffic Priority:
Maximum Sustained Rate:
Max Burst:
Minimum Reserved Rate:
Minimum Packet Size
Admitted QoS Timeout
Active QoS Timeout
OL-1581-08
show cable service-class [sclass-index] [verbose]
Identifies the index for a service class that has already been defined
(1 to 255).
Displays all of the defined attributes for the service class.
Modification
This command was introduced.
Support was added to the Release 12.2 BC train.
Dir
UP_UGS
US/DS UGS
UP_UGSAD
US/DS UGS_AD 0
UP_RTPS
US/DS RTPS
UP_BE
US/DS BE
DOWN_BE
US/DS BE
Dir
UP_UGS
US/DS UGS
Sched
Prio MaxSusRate
0
0
0
0
128000
5
128000
5
1000000
Sched
Prio MaxSusRate
0
0
1
UP_UGS
Upstream/Downstream
0
0 bits/sec
1522 bytes
0 bits/sec
100 bytes
30 seconds
30 seconds
Cisco Broadband Cable Command Reference Guide
show cable service-class
MaxBurst
MinRsvRate
1522
0
1522
0
2000
64000
2000
0
3000
0
MaxBurst
MinRsvRate
1522
0
3-151
Advertisement
Table of Contents
