Table of Contents
Advertisement
debug cable error
debug cable error
To display errors that occur in the cable MAC protocols, use the debug cable err command in privileged
EXEC mode. To disable debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.3NA
Usage Guidelines
This command displays unexpected DOCSIS MAC protocol messages. When the Cisco CMTS does not
to expect to receive a specific MAC message, or if a packet contains errors in size or content, an error
message and a hex dump of the packet are printed. Other miscellaneous error conditions may also show
up in output.
Examples
The following shows typical output displayed by the debug cable error command.
Router# debug cable error
Router#
00:19:22: Receive data error, status=0x0D04
00:19:22: Receive data error:
00:19:22: Prepended data:
00:19:22: Packet data (size=36):
00:19:22: 0x000: C2 00 00 1E 8E 07 00 E0 1E D7 CC 94 00 50 73 18
00:19:22: 0x010: E9 F1 00 0C
00:19:22:
Cisco Broadband Cable Command Reference Guide
5-34
debug cable error
no debug cable error
5C 1E 00 02 00 5F 58 5F 01 12 36 FF F2 00 00 00
Modification
This command was introduced.
Chapter 5
Cisco CMTS Debugging Commands
OL-1581-08
Advertisement
Table of Contents
