Cisco SR2016T-NA Reference Manual page 517

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

Chapter 3
Cisco CMTS Show Commands
DSG statistics information
DSG keepalive is set
Vendor: DDD, Tunnel count: 1
Vendor: BBB, Tunnel count: 2
Vendor name is DDD, tunnel MAC is 0001.0002.0003
Group address is 226.2.2.2, source address is *
Interface is Cable5/1,
Received 5968 packets,
Dropped 679 packets,
Vendor name is BBB, tunnel MAC is 0009.0010.0011
Group address is 227.2.2.2, source address is *
Interface is Cable3/0,
mapping entry is used 2
Received 0 packets,
Dropped 0 packets,
Vendor name is CCC, tunnel MAC is 0005.0006.0007
Group address is 228.3.3.3, source address is *
Interface is Cable5/1,
Received 5970056 packets,
Dropped 5569723 packets,
Router#
The following example shows a typical display for the show cable dsg stats command for an individual
vendor:
Router# show cable dsg stats vendor CCC
DSG statistics information
DSG keepalive is set
Vendor: CCC, Tunnel count: 1
Vendor name is CCC, tunnel MAC is 0005.0006.0007
Group address is 228.3.3.3, source address is *
Interface is Cable5/1,
Received 5970056 packets,
Dropped 5569723 packets,
Router#
The packet counters for both the stats and tunnel options for a particular DSG tunnel continue to
Note
increase as long as traffic is received over that tunnel. If the tunnel does not receive any traffic for three
minutes or more, the counters are automatically reset to 0.
The following example shows a typical display for the show cable dsg stats command for an individual
vendor when the associated cable interface is shut down. The Received, Forwarded, and Dropped
counters are not displayed when an interface is shut down.
Router(config)# interface c5/1
Router(config-if)# shutdown
Router(config-if)# exit
Router(config)# exit
Router# show cable dsg stats vendor CCC
DSG statistics information
OL-1581-08
mapping entry is used 1
forwarded 5289 packets
last second rate 16878 bits/sec
interface Cable3/0 is bundle master
forwarded 0 packets
last second rate 0 bits/sec
mapping entry is used 2
forwarded 400333 packets
last second rate 96768 bits/sec
mapping entry is used 2
forwarded 400333 packets
last second rate 96768 bits/sec
Cisco Broadband Cable Command Reference Guide
show cable dsg
3-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents