Cisco SR2016T-NA Reference Manual page 44

cable config-file
service-class 1 max-upstream 128
service-class 1 max-downstream 1000
timestamp
cable config-file disable.cm
access-denied
!
ip dhcp pool modems-c3
!
...
Related Commands Command
cable config-file
access-denied
channel-id
cpe max
debug cable config-file
download
frequency
option
privacy
service-class
snmp manager
timestamp
show running-config
show startup-config
For complete information on DOCSIS configuration files, see Appendix C in the DOCSIS 1.1 Radio
Note
Frequency (RF) Interface Specification, available on the DOCSIS Cable Labs official web site at
http://www.cablemodem.com/specifications.html.
Cisco Broadband Cable Command Reference Guide
2-32
network 10.30.128.0 255.255.240.0
bootfile test.cm
next-server 10.30.128.1
default-router 10.30.128.1
option 7 ip 10.30.128.1
option 4 ip 10.30.128.1
option 2 hex 0000.0000
Description
Creates a DOCSIS configuration file and enters configuration file
mode.
Disables access to the network.
Specifies upstream channel ID.
Specifies the maximum number of CPE devices allowed access.
Displays information about the DOCSIS configuration files that are
generated by the internal DOCSIS configuration file editor.
Specifies the filename and server IP address for downloading a new
software image.
Specifies the downstream frequency.
Specifies options for the configuration file that are not provided for by
the other commands.
Specifies privacy options for baseline privacy images.
Specifies service class definitions for the configuration file.
Specifies Simple Network Management Protocol (SNMP) options.
Enables time-stamp generation.
Displays the current run-time configuration, which includes any
configuration files that have been defined.
Displays the current saved configuration, which includes any
configuration files that have been defined and saved.
Chapter 2 Cisco CMTS Configuration Commands
OL-1581-08