Table of Contents
Advertisement
show cable qos enforce-rule
The following example shows sample output from the show cable qos enforce-rule command for one
particular enforce-rule:
Router# show cable qos enforce-rule residential
residential
Router#
Table 3-38
.
Table 3-38 show cable qos enforce-rule Field Descriptions
Field
Name
Dur (min)
Dir
byte-cnt (kbytes)
Auto enf
rate (min)
penalty (min)
Reg QoS
Enf QoS
Ena
Persist
Related Commands
Command
activate-rule at-byte-
count
cable qos enforce-rule
enabled
enforced qos-profile
Cisco Broadband Cable Command Reference Guide
3-144
Name
Dur
(min)
10
describes the significant fields displayed by the show cable qos enforce-rule command.
Description
Name of the enforce-rule.
Monitor-duration time period, in minutes.
Direction in which the byte-count is applied:
DS = downstream direction
•
US = upstream direction
•
Maximum number of bytes, in kilobytes, that subscribers using this
enforce-rule can transmit during the monitoring-duration window before
being considered to be over-consuming.
Displays whether the enforce-rule QoS profile is automatically activated
when a subscriber exceeds their allowed bandwidth.
Size of the sample rate interval, in minutes.
Size of the penalty period, in minutes.
Profile ID for the registered QoS profile.
Profile ID for the enforced QoS profile.
Displays whether this enforce-rule is currently enabled and active.
Displays whether this enforce-rule keeps the enforced QoS profile in
force across cable modem reboots:
Yes = Enforced QoS profiles remain in effect across cable modem
•
reboots.
No = Enforced QoS profiles do not remain in effect when a cable
•
modem reboots. See the no-persistence option for the
profile
Description
Specifies the number of bytes that a subscriber can transmit during the
monitoring period.
Creates an enforce-rule to be used to enforce a particular quality of service
(QoS) profile and enters enforce-rule configuration mode.
Activates an enforce-rule and begins subscriber traffic management.
Specifies the quality of service (QoS) profile that should be enforced when
users violate their assigned QoS profiles.
Dir byte-cnt Auto rate
(kbytes) enf
(min) (min)
us
5
act
1
command.
Chapter 3
Cisco CMTS Show Commands
penalty Reg Enf Ena Persist
QoS QoS
10080
5
10
Yes Yes
enforced qos-
OL-1581-08
Advertisement
Table of Contents
