Table of Contents
Advertisement
debug packetcable all
Examples
The following example shows typical output for the debug packetcable all command for the events
starting with a call is placed up until the gates go into the committed state:
Router# debug packetcable all
PacketCable Client:
Pktcbl gate control msgs debugging is on
Pktcbl gate coord msgs debugging is on
Pktcbl commit msgs debugging is on
Pktcbl event msgs debugging is on
Pktcbl rsvp-to-docsis msgs debugging is on
Pktcbl gate database changes debugging is on
Router#
Jul 25 14:28:13.442 UTC: PktCbl(cops): Received a COPS DEC message, flags is 0x1
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Received GATE ALLOC message, tid=0x4
Jul 25 14:28:13.442 UTC: Pktcbl(gdb): Created new Subscriber IE for 3.3.1.3
Jul 25 14:28:13.442 UTC: Pktcbl(gdb): Updated subscriber IE [subs addr: 3.3.1.3, gate: 38]
Jul 25 14:28:13.442 UTC: Pktcbl(gdb): Created gate IE, gateid = 38, total gates: 1
Jul 25 14:28:13.442 UTC: Pktcbl(gdb): Started gate [id 38] timer t0 [30 sec]
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Building GCP message, added obj TRANSACTION ID
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Building GCP message, added obj SUBSCRIBER ID (IPV4); len:8 padding:0
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Building GCP message, added obj GATE ID
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Building GCP message, added obj ACTIVITY COUNT
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Building GCP message, added obj GCOORD PORT
Jul 25 14:28:13.442 UTC: Pktcbl(gcp): Built GCP message, GATE ALLOC ACK , length: 40, copsLen 68
Jul 25 14:28:13.658 UTC: PktCbl(cops): Received a COPS DEC message, flags is 0x1
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Received GATE SET message, tid=0x6
Jul 25 14:28:13.658 UTC: Pktcbl(gdb): request to transition gate ID 38 to state 2
Jul 25 14:28:13.658 UTC: Pktcbl(gdb): GateID: 38, changed state to: 2
Jul 25 14:28:13.658 UTC: Pktcbl(gdb): request to transition gate ID 38 to state 2
Jul 25 14:28:13.658 UTC: Pktcbl(gdb): Stopped gate [id 38] timer [type 1]
Jul 25 14:28:13.658 UTC: Pktcbl(gdb): Started gate [id 38] timer t1 [180000 msec]
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Building GCP message, added obj TRANSACTION ID
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Building GCP message, added obj SUBSCRIBER ID (IPV4); len:8 padding:0
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Building GCP message, added obj GATE ID
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Building GCP message, added obj ACTIVITY COUNT
Jul 25 14:28:13.658 UTC: Pktcbl(gcp): Built GCP message, GATE SET ACK
Jul 25 14:28:13.822 UTC: PktCbl(d2r): DSA-REQ received, gateid: 38
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): handle=38 dir=0 type=3 (get gate flowspec)
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): handle=38 dir=1 type=2 (get gate flowspec)
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): handle=38 dir=0 type=2 (get gate flowspec)
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): handle=38 dir=1 type=3 spec=61DA13A8 (set gate flowspec)
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): handle=38 dir=0 type=3 spec=61DA13C4 (set gate flowspec)
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): request to transition gate ID 38 to state 3
Jul 25 14:28:13.822 UTC: Pktcbl(gdb): GateID: 38, changed state to: 3
Jul 25 14:28:13.826 UTC: Pktcbl(em): Send msg: type=QOS_RESERVE dqos=0x628DE278
Jul 25 14:28:13.834 UTC: Pktcbl(gdb): Get gate spec info, handle=38 dir=0 spec=61DA1420
Jul 25 14:28:23.950 UTC: Pktcbl(g2g): received GATE_OPEN message, tid 2
Jul 25 14:28:23.950 UTC: Pktcbl(g2g): sending g2g GATE_OPEN_ACK message to 192.168.80.15:1812 from
192.168.80.1:50048
Jul 25 14:28:23.950 UTC: Pktcbl(gdb): request to transition gate ID 38 to state 5
Jul 25 14:28:23.950 UTC: Pktcbl(gdb): GateID: 38, changed state to: 5
Jul 25 14:28:23.950 UTC: Pktcbl(gdb): Started gate [id 38] timert2 [2000 ms]
Jul 25 14:28:24.030 UTC: Pktcbl(gdb): Get gate spec info, handle=38 dir=1 spec=61DA1268
Jul 25 14:28:24.034 UTC: PktCbl(d2r): DSC-REQ received, gateid: 38
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): Get gate spec info, handle=38 dir=0 spec=61DA1308
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): handle=38 dir=0 type=6 (get gate flowspec)
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): handle=38 dir=1 type=3 (get gate flowspec)
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): handle=38 dir=0 type=3 (get gate flowspec)
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): handle=38 dir=1 type=6 spec=61DA13A8 (set gate flowspec)
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): handle=38 dir=0 type=6 spec=61DA13C4 (set gate flowspec)
Jul 25 14:28:24.034 UTC: Pktcbl(gdb): request to transition gate ID 38 to state 4
Cisco Broadband Cable Command Reference Guide
5-116
Chapter 5
Cisco CMTS Debugging Commands
; len:8 padding:0
; len:8 padding:0
; len:8 padding:0
; len:8 padding:0
; len:8 padding:0
; len:8 padding:0
; len:8 padding:0
, length: 32, copsLen 60
OL-1581-08
Advertisement
Table of Contents
