Cisco SR2016T-NA Reference Manual page 382

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

clear cable hop
clear cable hop
To clear the forward error corrections (FEC) hop counters on one or all cable interfaces on a
Cisco CMTS, use the clear cable hop command in privileged EXEC mode.
Syntax Description
cable slot/port
cable slot/subslot/port
upstream uport
Defaults
No default behavior or values
Command Modes
Privileged EXEC
Command History
Release
12.2(15)BC1
Usage Guidelines
The clear cable hop command clears the correctable and uncorrectable forward error corrections (FEC)
counters that are displayed by the
on the Cisco CMTS, for one specific interface (one downstream and its associated upstreams), or for a
specific upstream on a cable interface.
Examples
The following example shows how to clear the frequency hop counters on all cable interfaces on the
Cisco CMTS, along with sample output from the show cable hop command that shows the counters
being cleared:
Router# show cable hop
Upstream
Cisco Broadband Cable Command Reference Guide
2-370
clear cable hop [cable slot/port [upstream uport] ]
clear cable hop [cable slot/subslot/port [upstream uport] ]
Modification
This command was introduced.
Port
Poll Missed Min
(Optional) Clears the hop counters on a specific cable interface on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On
the Cisco uBR7200 series router, slot can range from 3 to 6, and port
can be 0 or 1, depending on the cable interface.
(Optional) Clears the hop counters on a specific cable interface on the
Cisco uBR10012 router. The following are the valid values:
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
(Optional) Clears the hop counters on a specific upstream port on a
specific cable interface. The valid values for uport start with 0 for the
first upstream port on the cable interface line card.
show cable hop
command. You can clear the counters for all interfaces
Missed Hop
Chapter 2
Cisco CMTS Configuration Commands
Hop
Corr
Uncorr
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents