Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
debug cable freqhop
To display debug messages for frequency hopping, use the debug cable freqhop command in privileged
EXEC mode. Use the no form of this command to disable debugging output.
Syntax Description
This command has no arguments or keywords.
Command History
Release
12.0(4)XI
Examples
The following example shows how to display debug messages for frequency hopping:
router# debug cable interface c6/0
router# debug cable freqhop
CMTS freqhop debugging is on
router#
Sep 27 10:36:41.202: Cable5/0 U0: last hop delta: 1
Sep 27 10:36:42.202: Cable5/0 U0: last hop delta: 2
OL-1581-08
debug cable freqhop
no debug cable freqhop
Modification
This command was introduced.
Cisco Broadband Cable Command Reference Guide
debug cable freqhop
5-37
Advertisement
Table of Contents
