Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/0. Deactivate 1 5
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/0. Deactivate 1 4
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 1
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 3
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 6
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 2
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 4
May 31 10:21:12.350 HCCP hwif_goingdown for Cable5/1/1. Deactivate 2 5
May 31 10:21:13.726 HCCP 1 1 Protect: turn off "uc" - 1972 msec
May 31 10:21:13.790 HCCP 2 1 Protect: turn off "uc" - 2036 msec
May 31 10:21:14.422 HCCP 1 1 Protect: turn off "nru" - 696 msec
May 31 10:21:14.422 HCCP 1 1 Protect: unload config (if) - 0 msec
May 31 10:21:14.438 HCCP 1 1 Protect: unload config (subif) - 16 msec
May 31 10:21:14.702 HCCP 1 1 Protect: unload config (ds) - 264 msec
May 31 10:21:14.702 HCCP 1 1 Protect: become standby - 0 msec
May 31 10:21:16.078 HCCP 2 1 Protect: turn off "nru" - 2288 msec
May 31 10:21:16.078 HCCP 2 1 Protect: unload config (if) - 0 msec
May 31 10:21:16.078 HCCP 2 1 Protect: unload config (subif) - 0 msec
May 31 10:21:16.599 HCCP 2 1 Protect: unload config (ds) - 520 msec
May 31 10:21:16.599 HCCP 2 1 Protect: become standby - 0 msec
May 31 10:21:17.014 HCCP: P missed hello ack in LEARN state and is locked. Deactivate 4 1
May 31 10:21:17.014 HCCP 4 1 Protect: turn off "rfswitch" - 52 msec
May 31 10:21:17.593 HCCP 3 1 Working: turn on "rfswitch" - 0 msec
May 31 10:21:17.593 HCCP 3 1 Working: become active - 0 msec
May 31 10:21:18.112 HCCP 1 1 Protect: load config (if) - 0 msec
May 31 10:21:18.112 HCCP 1 1 Protect: load config (subif) - 4 msec
May 31 10:21:18.331 HCCP 1 1 Protect: load config (ds) - 100 msec
May 31 10:21:18.331 HCCP 2 1 Working: turn off "rfswitch" - 0 msec
May 31 10:21:18.331 HCCP 2 Cable5/0/1 Protect: resolve conflict Learn->Teach
May 31 10:21:18.331 HCCP 2 1 Protect: load config (if) - 0 msec
May 31 10:21:18.331 HCCP 2 1 Protect: load config (subif) - 0 msec
May 31 10:21:19.691 HCCP 2 1 Protect: load config (ds) - 76 msec
May 31 10:21:20.112 HCCP 2 1 Protect: turn on "rfswitch" - 48 msec
May 31 10:21:20.112 HCCP 2 1 Protect: become active - 0 msec
May 31 10:21:20.112 HCCP 2 1 Protect: load config (ds) - 76 msec
May 31 10:21:20.112 HCCP 2 1 Protect: turn on "rfswitch" - 48 msec
May 31 10:21:20.112 HCCP 2 1 Protect: become active - 0 msec
The following example shows typical output for the debug hccp timing if-config command:
Router# debug hccp events
Router# debug hccp timing if-config
HCCP Timing measurements messages of (UN)LOAD IF config CLI is on
HCCP 1 1 Working: unload config (ds) - 112 msec
HCCP 1 1 Protect: load config (ds) - 123 msec
HCCP 1 1 Protect: load config (chnl set freq) - 35 msec
Related Commands
Command
debug hccp
authentication
debug hccp
channel-switch
debug hccp events
debug hccp inter-db
OL-1581-08
Description
Displays authentication debug messages for HCCP groups.
Displays debug messages related to an RF or channel switch that is being
used for HCCP N+1 (1:n) redundancy.
Displays debug messages for all HCCP group interaction.
Displays debug messages for the inter-database events during HCCP
operations.
Cisco Broadband Cable Command Reference Guide
debug hccp timing
5-113
Advertisement
Table of Contents
