Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
For more information about DOCSIS SYSLOG services and event messages, see Section 4.4.2.2.2,
Tip
SYSLOG Message Format, in the
Specification
that can be generated on the Cisco CMTS router, see the Cisco CMTS Error Message manual.
Examples
The following commands configure the Cisco CMTS so that it can generate a maximum number of 25
SNMP traps and SYSLOG messages for DOCSIS events over a two-minute period:
Router# configure terminal
Router(config)# cable event throttle-interval 120
Router(config)# cable event throttle-threshold 25
Router(config)#
Related Commands
Command
cable event priority
cable event syslog-server
cable event throttle-
adminStatus
cable event throttle-interval
snmp-server enable traps
cable
snmp-server enable traps
docsis-cmts
OL-1581-08
DOCSIS 1.1 Operations Support System Interface (OSSI)
(SP-OSSIv1.1-I06-020830). For more information about all cable-related event messages
Description
Configures the event reporting flags for DOCSIS event messages,
which determines how the Cisco CMTS reports these events.
Enables logging of DOCSIS event messages to a SYSLOG server.
Configures how the Cisco CMTS throttles the SNMP traps and
SYSLOG messages it generates for DOCSIS event messages.
Specifies the throttle interval, which helps control how often the
Cisco CMTS generates SNMP traps and SYSLOG messages for
DOCSIS event messages.
Enables traps for cable-related events.
Enables traps for DOCSIS-related MAC-layer events.
Cisco Broadband Cable Command Reference Guide
cable event throttle-threshold
2-91
Advertisement
Table of Contents
