Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC: Pktcbl(Commit): Commit msg from [addr/port 192.168.78.19/50024],
length 40
Jul 25 16:13:34 UTC: Pktcbl(Commit): (commit) - Calling DOCSIS QoS module Commit
Jul 25 16:13:34 UTC: Pktcbl(Commit): Sending COMMIT response [241] [src
192.168.78.1/50024, dest 192.168.78.19/50024]
Jul 25 16:13:34 UTC: Commit Header
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
20380
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Jul 25 16:13:34 UTC:
Gate Control Event Debugging
The following example shows typical debugging messages for gate control events. Omit the verbose
option if you do not want to display the header and message contents.
Router# debug packetcable subscriber 192.168.78.21 verbose
Router# debug packetcable control
Pktcbl gate control msgs (detail) debugging is on
Jul 25 16:23:15 UTC: Pktcbl(gcp): Received a COPS DEC message
Jul 25 16:23:15 UTC: --- Pktcbl(gcp): Received GCP message ------
Jul 25 16:23:15 UTC: TRANSACTION ID
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: SUBSCRIBER ID (IPV4) : Object.[snum/stype/len 2/1/8]
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: ACTIVITY COUNT
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: --------------------------------------
Jul 25 16:23:15 UTC: Pktcbl(gcp): Building GCP message:added obj TRANSACTION ID
len:8 padding:0
Jul 25 16:23:15 UTC: Pktcbl(gcp): Building GCP message:added obj SUBSCRIBER ID (IPV4);
len:8 padding:0
Jul 25 16:23:15 UTC: Pktcbl(gcp): Building GCP message:added obj GATE ID
len:8 padding:0
Jul 25 16:23:15 UTC: Pktcbl(gcp): Building GCP message:added obj ACTIVITY COUNT
len:8 padding:0
Jul 25 16:23:15 UTC: Pktcbl(gcp): Building GCP message:added obj GCOORD PORT
len:8 padding:0
Jul 25 16:23:15 UTC: Pktcbl(gcp): Built GCP message, GATE ALLOC ACK
copsLen 68
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: TRANSACTION ID
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: SUBSCRIBER ID (IPV4) : Object.[snum/stype/len 2/1/8]
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: GATE ID
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: ACTIVITY COUNT
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: GCOORD PORT
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC:
Jul 25 16:23:15 UTC: --- Pktcbl(gcp): Received GCP message ------
Jul 25 16:23:15 UTC: TRANSACTION ID
OL-1581-08
Id = 2430632
ver (0x)
: 01
msg type
: COMMIT_ACK [241]
checksum
: 33 FFFFFF96
sending ttl : 255
msg length
: 40
Destination 192.168.78.21, Protocol_Id 17, Don't Police , DstPort
Source 192.168.78.19, udp_source_port 20362
GATE_ID
type 8 length 8 :
Id = 2359392
: Object.[snum/stype/len 1/1/8]
transaction id
: 0x5
gcp cmd
: 1 (GATE ALLOC)
Addr
: 192.168.78.19
: Object.[snum/stype/len 4/1/8]
Count
: 10
--- Pktcbl(gcp): Sending GCP message ------
: Object.[snum/stype/len 1/1/8]
transaction id
: 0x5
gcp cmd
: 2 (GATE ALLOC ACK)
Addr
: 192.168.78.19
: Object.[snum/stype/len 3/1/8]
GateID
: 2359392 (0x240060)
: Object.[snum/stype/len 4/1/8]
Count
: 1
: Object.[snum/stype/len 12/1/8]
gcoord port
: [50048]
--------------------------------------
: Object.[snum/stype/len 1/1/8]
Cisco Broadband Cable Command Reference Guide
debug packetcable gate
;
;
;
;
, length: 40,
5-123
Advertisement
Table of Contents
