Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows how to set the downstream center frequency display value:
router(config)# interface c6/0
router(config-if)# cable downstream frequency 96000000
router(config-if)#
Related Commands
Command
cable downstream annex
cable downstream rf-power
cable downstream rf-
shutdown
show controllers cable
OL-1581-08
Description
Sets the MPEG framing format for a downstream port on a cable
interface line card to either Annex A (Europe) or Annex B (North
America).
Configures the desired RF output power on the integrated
upconverter.
Enables or disables the RF output from the integrated upconverter.
Displays status and configuration information for the cable interface.
On supported cable interfaces, this includes information about the
integrated upconverter.
Cisco Broadband Cable Command Reference Guide
cable downstream frequency
2-51
Advertisement
Table of Contents
