Cisco SR2016T-NA Reference Manual page 386

clear cable load-balance
clear cable load-balance
To clear the counters or state machine used to track load-balancing operations, use the clear cable load-
balance command in privileged EXEC mode.
Syntax Description
counters
state
Defaults No default behavior or values
Command Modes Privileged EXEC
Command History Release
12.2(15)BC1
Examples The following example shows how to clear all of the counters that track load-balancing operations,
resetting them all to zero:
Router# clear cable load-balance counters
Router#
The following example shows how to clear the state machine that is used for load-balancing operations.
Router# clear cable load-balance state
Router#
Related Commands Command
cable load-balance
exclude
cable load-balance
group (global
configuration)
cable load-balance
group (interface
configuration)
cable load-balance
group interval
Cisco Broadband Cable Command Reference Guide
2-374
clear cable load-balance {counters | state}
Clears all load balancing statistical counters.
Clears all state information in the load balancing state machine. This
command will also put all cable interfaces and their upstream channels in
the "up" state, unless they are explicitly shut down using the shutdown
interface configuration command.
Modification
This command was introduced for the Cisco uBR7246VXR and
Cisco uBR10012 routers.
Description
Excludes a particular cable modem, or all cable modems from a particular
vendor, from one or more types of load-balancing operations.
Creates and configures a load-balance group.
Assigns a downstream to a load-balance group.
Configures the frequency of the load-balancing policy updates.
Chapter 2 Cisco CMTS Configuration Commands
OL-1581-08