Table of Contents
Advertisement
packetcable timer
Examples
The following example shows the T0 timer being set to 20 seconds (20,000 milliseconds):
Router# configure terminal
Router(config)# packetcable timer T0 20000
Router(config)#
Related Commands
Command
packetcable
packetcable authorize
vanilla-docsis-mta
packetcable element-
id
packetcable gate
maxcount
show packetcable
global
Cisco Broadband Cable Command Reference Guide
2-462
Description
Enables PacketCable operations on the Cisco CMTS.
Allows Unsolicited Grant Service (UGS) service flows without a proper
PacketCable gate ID when PacketCable operations are enabled on the
Cisco CMTS.
Configures the PacketCable Event Message Element ID.
Changes the maximum number of PacketCable gate IDs in the gate database
on the Cisco CMTS.
Displays the current PacketCable configuration.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
