Table of Contents
Advertisement
show tech-support
Usage Guidelines
The show tech-support command displays a large amount of configuration, run-time status, and other
information about the Cisco CMTS for troubleshooting problems. The output of this command can be
provided to technical support representatives when reporting a problem.
The
Note
command.
The show tech-support command automatically displays the output of a number of different show
commands. The exact output depends on the platform, configuration, and type of protocols being used.
Typically, the output includes the output from the following commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco Broadband Cable Command Reference Guide
3-260
show tech-support
includes most of the information shown in the
show version
show running-config
show stacks
show chassis
show pxf microcode (Cisco uBR10012 only)
show pxf cpu statistics (Cisco uBR10012 only)
show pxf cpu subblocks (Cisco uBR10012 only)
show pxf cpu buffer (Cisco uBR10012 only)
show pxf dma (Cisco uBR10012 only)
show pxf cpu cef memory (Cisco uBR10012 only)
show pxf cpu queue (Cisco uBR10012 only)
show pxf cpu statistics drop (Cisco uBR10012 only)
show interfaces
show controllers (for all cable interface)
show cable modem
show cable flap-list
show cable qos profile
show cable modulation-profile
show cable spectrum-group
show cable hop
show interface cable sid
(for each cable interface)
show interface cable sid connectivity
show interface cable downstream
show interface cable upstream
show interface cable mac-scheduler
show interface cable modem
show process memory
show process cpu
show controllers (for all non-cable interfaces)
Chapter 3
(for each cable interface)
Cisco CMTS Show Commands
show cable tech-support
OL-1581-08
Advertisement
Table of Contents
