Cisco SR2016T-NA Reference Manual page 621

Chapter 3 Cisco CMTS Show Commands
Usage Guidelines
Also see the information about this command's behavior in a Hot Standby Connection-to-Connection
Note
Protocol (HCCP) configuration, see the
Protocol (HCCP) Configuration" section on page
Examples The following example shows sample output for the default form of the show cable modem
unregistered command.
Router# show cable modem unregistered
Interface
Cable3/0/U0 1
Cable3/0/U0 2
Router#
The following example shows sample output for the show cable modem unregistered command for a
particular cable interface:
Router# show cable modem c8/1/0 unregistered
Interface Prim Online
C8/1/0/U1 1
C8/1/0/U4 2
C8/1/0/U4 3
Router#
The following example shows sample output for the show cable modem unregistered command for a
single CM, as identified by its IP address:
Router# show cable modem 22.1.1.10 unregistered
Interface Prim Online
C8/1/0/U4 3
Router#
The following example shows sample output for the show cable modem unregistered command for a
single CM, as identified by its MAC address:
Router# show cable modem 0006.5314.858d unregistered
Interface Prim Online
C8/1/0/U4 3
Router#
Note An asterisk (*) in the Receive Power column indicates that a power adjustment has been made for that
CM. An exclamation point (!) in the Receive Power column indicates that the CM has reached its
maximum power transmit level and cannot increase its power level further. An exclamation point (!) in
the Timing Offset column indicates that the CM has exceeded the maximum delay and timing offset
specified by the
OL-1581-08
Prim Online Timing Rec
Sid State Offset Power
online 2812
online 2804
Timing Rec
Sid State Offset Power
online 1548
online 1925
online 1918
Timing Rec
Sid State Offset Power
online 1918
Timing Rec
Sid State Offset Power
online 1918
cable map-advance
"Operation with Hot Standby Connection-to-Connection
3-54.
QoS CPE IP address
-0.25 5 1 3.18.1.5
0.50 5 0 3.18.1.9
QoS CPE IP address
0.00 5 0 22.1.1.11
0.00 5 0 23.1.1.10
-0.50 2 0 22.1.1.10
QoS CPE IP address
-0.75 2 0 22.1.1.10
QoS CPE IP address
-0.25 2 0 22.1.1.10
command.
Cisco Broadband Cable Command Reference Guide
show cable modem unregistered
MAC address
0030.80bc.2303
0006.2854.73f5
MAC address
0050.7366.1243
0002.b970.0027
0006.5314.858d
MAC address
0006.5314.858d
MAC address
0006.5314.858d
3-125