Table of Contents
Advertisement
show cable modem phy
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable modem remote-
query
cable modem vendor
show cable modem
show cable modem
cnr
show cable modem
connectivity
show cable modem
cpe
show cable modem
errors
show cable modem
flap
show cable modem
mac
show cable modem
maintenance
show cable modem
remote-query
show interface cable
modem
show interface cable
sid
Cisco Broadband Cable Command Reference Guide
3-104
Description
Enables and configures the remote-query feature to gather CM performance
statistics on the CMTS.
Associates the name of a vendor with its Organizational Unique Identifier
(OUI).
Displays information for the registered and unregistered CMs.
Displays information about the upstream carrier-to-noise ratio (CNR) for a
particular cable modem.
Displays connectivity statistics for one or more CMs.
Displays the CPE devices accessing the cable interface through a particular
CM.
Displays error statistics for one or more CMs.
Displays flap list statistics for one or more cable modems.
Displays MAC layer information for one or more CMs.
Displays station maintenance (SM) error statistics for one or more cable
modems.
Displays information collected by the remote-query feature.
Displays information about the CMs connected to a particular cable
interface.
Displays cable interface information.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
