Cisco SR2016T-NA Reference Manual page 645

Chapter 3 Cisco CMTS Show Commands
Profile Index
Name
Upstream Traffic Priority
Upstream Maximum Rate (bps)
Upstream Guaranteed Rate (bps)
Unsolicited Grant Size (bytes)
Unsolicited Grant Interval (usecs)
Upstream Maximum Transmit Burst (bytes) 0
IP Type of Service Overwrite Mask
IP Type of Service Overwrite Value
Downstream Maximum Rate (bps)
Created By
Baseline Privacy Enabled
Table 3-40
Table 3-40 show cable qos profile Command Field Descriptions
Field
ID
Prio
Max upstream bandwidth
Guarantee upstream bandwidth
Max downstream bandwidth
Max tx burst
Tos mask
Tos value
Create by
B priv enab
IP prec. rate enab
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
OL-1581-08
describes the fields displayed by the show cable qos profile command.
Description
Profile number.
Priority level.
Maximum upstream bandwidth.
Guaranteed minimum upstream bandwidth.
Maximum downstream bandwidth.
Maximum transmit burst size in bytes.
Hex value of the mask bits.
Value of the mask byte.
Identity of who created the profile:
•
•
•
•
Describes whether Baseline Privacy Interface (BPI) encryption is
enabled (yes) or disabled (no) for this QoS profile.
Describes whether IP precedence rate limiting enabling is enabled
(yes) or disabled (no) for this QoS profile. When a profile is created
by a CM, this value is set by the Type Length Value (TLV) 11 fields
in the DOCSIS configuration file, unless overwritten using the
cable qos profile
1
Default
0
0
0
0
0
0x0
0x0
0
cmts(r)
no
cmts = Created by the CMTS with read-write properties. The
profile can be modified but not deleted.
cmts(r) = Created by the CMTS with read-only properties. The
profile cannot be modified or deleted.
cm = Created by the CM DOCSIS configuration file.
mgmt = Created by an operator using CLI commands.
command.
Cisco Broadband Cable Command Reference Guide
show cable qos profile
3-149