Table of Contents
Advertisement
show interface cable monitor
show interface cable monitor
To display cable monitor information, use the show interface cable monitor command in privileged
EXEC mode.
Syntax Description
slot/port
slot/subslot/port
Command Modes
Privileged EXEC
Command History
Release
12.1(3a)EC
12.2(4)XF
12.2(4)BC1
Examples
The following is sample output from the show interface cable monitor command:
CMTS01# show interface cable 5/0 monitor
US/ Time Outbound
DS
us
all
all
Table 3-55 show interface cable monitor Field Descriptions
Field
DS
UP
ALL
Cisco Broadband Cable Command Reference Guide
3-222
show interface cable {slot/port | slot/subslot/port} monitor
Identifies the cable interface and downstream port on the Cisco uBR7100 series
and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0 or 1,
depending on the cable interface.
Identifies the cable interface on the Cisco uBR10012 router. The following are
the valid values:
•
slot = 5 to 8
subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
•
Modification
This command was introduced.
Support was added for the Cisco uBR10012 universal broadband router.
Support was added to the Release 12.2 BC train.
Flow
Stmp Interface Type
no
Et1/2
us-port
no
Et1/2
acc-list 103
yes
Et1/2
mac-addr 0050.0000.0000 yes
Flow Type
Flow
Packet MAC
Identifier
Extn. Type
0
yes
data
yes
data
mac
Description
Downstream. Indicates that only downstream flows are monitored.
Upstream. Indicates that only upstream flows are monitored.
Indicates that all flows are monitored.
Chapter 3
Cisco CMTS Show Commands
MAC
Encap
Extn. Type
Type
no
-
docsis
no
-
docsis
no
-
-
OL-1581-08
Advertisement
Table of Contents
