Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows how to set the range backoff to automatic for upstream port 2:
Router(config)# interface cable 4/0
Router(config-if)# cable upstream 2 range-backoff automatic
Router(config-if)#
Related Commands
Command
cable insertion-interval
cable upstream data-backoff
OL-1581-08
Description
Configures the interval between consecutive initial ranging slots on
an upstream.
Specifies automatic or fixed start and stop values for data backoff.
Cisco Broadband Cable Command Reference Guide
cable upstream range-backoff
2-343