Table of Contents
Advertisement
show packetcable gate
show packetcable gate
To display information about one or more gates in the gate database, use the show packetcable gate
command in user EXEC or privileged EXEC mode.
Syntax Description
downstream
upstream
summary
gate-id
Defaults
Displays information about gates on both upstreams and downstreams, if upstream or downstream is
not specified.
Command Modes
User EXEC, Privileged EXEC
Command History
Release
12.2(8)BC2
12.2(11)BC3
12.2(15)BC1
Usage Guidelines
This command displays information about one or more gates in the gate database on the Cisco CMTS.
You can display a summary for all currently active gates, for all downstream or all upstream gates, or
you can display detailed information about a specific gate.
Examples
The following example shows typical output for the show packetcable gate summary command, which
displays all current gates on the CMTS:
Router# show packetcable gate summary
GateID
2566
18950
Total number of gates = 2
Total Gates committed(since bootup or clear counter) = 2
Cisco Broadband Cable Command Reference Guide
3-252
show packetcable gate [downstream | upstream] {summary | gate-id}
(Optional) Display information only for gates in the downstream direction.
(Optional) Display information only for gates in the upstream direction.
Display a summary containing the gate ID, subscriber ID, subscriber IP
address, and current state information.
Display information for a specific gate ID. The valid range is 0 to
4294967295.
Modification
This command was introduced for the Cisco uBR7200 series universal
broadband router.
The output for the summary option was enhanced to display the cable
interface and service flow IDs (SFIDs) associated with each PacketCable
gate.
Support was added for the Cisco uBR10012 router.
Slot SubscriberID
2/0
3.18.1.4
2/0
3.18.1.5
GC-Addr
State
172.22.87.45
COMMIT
172.22.87.45
COMMIT
Chapter 3
Cisco CMTS Show Commands
SFID
SFID
(us)
(ds)
9
10
7
8
OL-1581-08
Advertisement
Table of Contents
