Table of Contents
Advertisement
cable upstream spectrum-group
Related Commands
Command
cable modulation-profile
cable spectrum-group (global
configuration)
cable spectrum-group
(interface configuration)
cable spectrum-group hop
period
cable spectrum-group hop
threshold
cable spectrum-group shared
cable upstream hopping blind
Cisco Broadband Cable Command Reference Guide
2-350
Description
Configures preset modulation profiles that you can apply to one or
more upstream cable interfaces when you identify and configure
spectrum groups.
Creates and configures a spectrum group.
Assigns a spectrum group to all of the upstreams on a cable
interface line card.
Sets the minimum frequency-hop interval for a cable spectrum
group.
Specifies a hop threshold for a cable spectrum group.
Specifies the upstream ports in a spectrum group can share the
same upstream frequency.
Disengages the advanced spectrum management features of the
Cisco uBR-MC16S and Cisco uBR-MC5X20S/U cable interface
line cards by enabling blind frequency hopping behavior.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
