Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show hccp interface
To display information on all Hot Standby Connection-to-Connection Protocol (HCCP) groups
associated with a specific cable interface, use the show hccp interface command in user EXEC or
privileged EXEC mode.
Syntax Description
interface
brief
detail
Command Modes
User EXEC, Privileged EXEC
Command History
Release
12.1(3a)EC
12.2(4)BC1
12.2(8)BC2
12.2(11)BC1
Examples
The following examples are from the show hccp interface cable 4/0 and show hccp interface cable 4/0
brief commands:
Router# show hccp interface cable 4/0
Cable4/0 - Group 1 Protect, enabled, blocking
authentication md5, key-chain "cisco1"
hello time 2000 msec, hold time 6000 msec
Member 1 standby
ip addr: working 10.20.111.11, protect 10.20.111.10
downstream wavecom (1.1.11.3/1, 1.1.11.3/2), upstream none
Router# show hccp interface cable 4/0 brief
Interface Config
Ca4/0
Router#
OL-1581-08
show hccp interface interface [brief | detail]
The cable interface for which you want to display HCCP group information.
The information presented includes HCCP groups, configuration types,
member numbers, status, authentication algorithms, authentication key
chains, HCCP timers, Ip address assignments, and downstream switch
designations for the specified cable interface.
(Option) Displays a brief summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
(Option) Displays a detailed summary of the HCCP groups, configuration
types, member numbers, and status for a specified cable interface.
Modification
This command was introduced.
The detail option was added.
The current time to resync and current wait to restore was added to the brief
option.
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router and Cisco uBR-MC16C, Cisco uBR-MC16S,
and Cisco uBR-MC28C cards.
Grp Mbr Status
Protect
1
1
standby
Cisco Broadband Cable Command Reference Guide
show hccp interface
3-201
Advertisement
Table of Contents
