Table of Contents
Advertisement
show controllers clock-reference
Table 3-46 show controllers clock-reference Field Descriptions (continued)
Field
Line Card Presence Status Reg
LC Presence Input Reg
Note
LC Power off Status Reg
Tip
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
show commands using the exec prompt timestamp command in line configuration mode.
Cisco Broadband Cable Command Reference Guide
3-184
The Line Card Presence Status Reg displays the line card state as determined by the Cisco IOS
software, while the LC Presence Input Reg displays the state as determined by the chassis
hardware.
Description
The first eight bits indicate whether the line card is physically
present, and the high eight bits indicate whether the card's
physical state has changed since the counters were last cleared
using the
cable clock clear-counters
0x0001=slot 5/0 contains a cable interface card
0x0002=slot 5/1 contains a cable interface card
0x0004=slot 6/0 contains a cable interface card
0x0008=slot 6/1 contains a cable interface card
0x0010=slot 7/0 contains a cable interface card
0x0020=slot 7/1 contains a cable interface card
0x0040=slot 8/0 contains a cable interface card
0x0080=slot 8/1 contains a cable interface card
0x0100=slot 5/0 has changed physical state
0x0200=slot 5/1 has changed physical state
0x0400=slot 6/0 has changed physical state
0x0800=slot 6/1 has changed physical state
0x1000=slot 7/0 has changed physical state
0x2000=slot 7/1 has changed physical state
0x4000=slot 8/0 has changed physical state
0x8000=slot 8/1 has changed physical state
The lower eight bits of this register indicate whether a cable
interface line card is physically present in the chassis slot. The
bit meanings are the same as the lower eight bits the Line Card
Presence Status Reg.
The upper eight bits of this register are unused.
0x01=slot 5/0 is powered off
0x02=slot 5/1 is powered off
0x04=slot 6/0 is powered off
0x08=slot 6/1 is powered off
0x10=slot 7/0 is powered off
0x20=slot 7/1 is powered off
0x40=slot 8/0 is powered off
0x80=slot 8/1 is powered off
Chapter 3
Cisco CMTS Show Commands
command.
OL-1581-08
Advertisement
Table of Contents
