Cisco SR2016T-NA Reference Manual page 936

debug cable telco-return
debug cable telco-return
To display debug messages for telco-return events, use the debug cable telco-return command in
privileged EXEC mode. To disable debugging output, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.0(4)XI
Usage Guidelines
This command is supported only in images that support telco-return operation (-t-).
Examples The following is sample output from the debug cable telco-return and
commands:
Router# debug cable telco-return
Router# debug cable telco-return msg
01:17:31:Sending TCD message:
TLV type = 1
TLV len = 56
Factory default flag: 1
Phone number 1:
Service provider name:uBR7246
Connection threshold: 10
Username:
Password:
DHCP authenticate:
DHCP server:
PPP authentication:
Manual dial:
Sending TSI message:
DS channel IP address:
Registration IP address:10.10.10.10
CMTS boot time:
DS channel ID:
Epoch:
Related Commands Command
debug cable telco-return msg
Cisco Broadband Cable Command Reference Guide
5-76
debug cable telco-return
no debug cable telco-return
5551212
guest
password
1
10.10.255.255
2
1
Modification
This command was introduced.
10.10.10.10
3080626752
0
1
Description
Displays the Telephony Channel Descriptor (TCD) and Termination
System Information (TSI) messages.
Chapter 5 Cisco CMTS Debugging Commands
debug cable telco-return msg
OL-1581-08