Chapter 4
Commands for the Cisco uBR10012 Router
Related Commands
Command
associate
redundancy
redundancy reload
redundancy
force-failover
main-cpu
OL-1581-08
Description
Associates two line cards for Automatic Protection Switching (APS)
redundancy protection.
Enters redundancy configuration mode so that the synchronization
parameters can be configured.
Resets the standby PRE1 module or to reset both the active and standby
PRE1 modules.
Forces a switchover, so that the standby Performance Routing Engine
(PRE1) module becomes the active PRE1 module.
Cisco Broadband Cable Command Reference Guide
redundancy switch-activity
4-43