Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
debug cable reset
To display debugging messages when cable interfaces are reset due to the complete loss of received
packets, use the debug cable reset command in privileged EXEC mode. To disable debugging output,
use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.3NA
Usage Guidelines
This command activates display of reset messages from cable interfaces.
Examples
The following shows typical output from the debug cable reset command:
Router# debug cable reset
CMTS reset debugging is on
Router#
Resetting CMTS interface.
OL-1581-08
debug cable reset
no debug cable reset
Elapsed time: 21 seconds
Modification
This command was introduced.
Num SIDs = 32 Ranging count = 10
Cisco Broadband Cable Command Reference Guide
debug cable reset
5-69
Advertisement
Table of Contents
