Table of Contents
Advertisement
debug cable specmgmt
debug cable specmgmt
To debug spectrum management (frequency agility) on the HFC network, use the debug cable
specmgmt command in privileged EXEC mode. To disable debugging output, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.3NA
12.0(4)XI
Usage Guidelines
This command activates debugging of spectrum management (frequency agility) on the HFC network.
When this command is activated, any messages generated due to spectrum group activity will be
displayed on the Cisco CMTS console. Spectrum group activity can be additions or changes to spectrum
groups, or frequency and power lever changes controlled by spectrum groups.
Examples
The following shows sample output from the debug cable specmgmt command:
Router# debug cable specmgmt
CMTS specmgmt debugging is on
Router#
reassign-blind: U0 not present or shutdown
Cisco Broadband Cable Command Reference Guide
5-72
debug cable specmgmt
no debug cable specmgmt
Modification
This command was introduced.
This command was removed and replaced by the
hw-spectrum
command.
Chapter 5
Cisco CMTS Debugging Commands
debug cable
OL-1581-08
Advertisement
Table of Contents
